Most children love to play with various toys during bath time. It’s a rather tedious activity for them, so you ought to keep them interested by incorporating a bunch of bath toys into the equation. Whether you opt for inflatables, squeaky toys, or perhaps a DIY toy, the most important thing you should keep in mind is to keep those toys immaculately clean at all times or else you’re going to put your child’s health at risk.
There are plenty of bacteria, mold, and other nasty stuff lurking in the water, and as you may know, children are quite susceptible to catching a plethora of diseases caused by contaminated toys or water.
If you’re struggling to find an easy and quick way to clean your kid’s toys thoroughly, take a moment and check out some of the methods we’ve covered in this article as they should help you understand how to clean bath toys without wasting too much time and money.
It’s always a good idea to dive deep into the reasons as to why it’s important to keep your kid’s stuff clean and under control. As you may know, a child’s immune system is quite fragile, and it’s not designed to battle against serious diseases caused by contaminated water.
The thing that makes bath toys a massive health hazard is the fact that the vast majority doesn’t completely dry out. In other words, while a particular toy may seem sufficiently clean on the outside, the inside is usually fertile ground for mold and various bacteria.
Taking care of bath toys can be a challenging endeavor because they have a bunch of hard-to-reach surfaces, but it is of utmost importance for the well-being of your child. Therefore, make sure to always clean your child’s toys thoroughly with no exceptions!
A few recent studies have shown that your kid’s squeaky toys might be putting them at serious risk of ear, stomach, and eye infections. Needless to say, getting rid of grime and mold should be one of your priorities as it will prevent a lot of unpleasant scenarios.
There are a couple of popular methods you can use in order to reduce the risks and keep your child safe and healthy. Bear in mind that these cleaning methods do work as intended, but none of them is the ultimate solution. In other words, you shouldn’t rely on a single method, but rather utilize all of them and thereby significantly decrease the chances of exposing your child to numerous health hazards in the bath tub.
Here are some of the most popular methods used by many parents:
Vinegar is a great solution for this particular predicament because it’s very effective and harmless at the same time. Most chemical solutions come with a caveat while vinegar is completely safe, meaning it should be your first choice.
The process is rather simple and straightforward. All you have to do is mix two parts warm water and one part white vinegar. Bear in mind; you don’t need to use soap for this solution as the acid in the vinegar will naturally break down most of the dirt.
White vinegar should be your first choice, but apple cider vinegar works well too. The reason why white vinegar is a better option is because it doesn’t leave any residue nor does it cause discoloration.
Once you have prepared the solution, squeeze any excess water from the toy and soak it in the vinegar solution. It’s very important to get rid of any excess water inside the toy because otherwise, mold could grow back, even after the vinegar treatment.
Let the toy soak for about 15-20 minutes before scrubbing it with a small brush. Make sure to scrub in all directions for a couple of minutes. On top of that, make sure to cover everything, even the most hard-to-reach surfaces. Rinse the toy subsequently and let it dry on a towel.
Before you even start, make sure the toy is dishwasher-friendly. A dishwasher uses high temperatures to kill the bacteria, meaning it could cause structural damage to toys that aren’t foreseen to withstand high temperatures.
Squeeze any excess water out of the toy before putting it in the dishwasher. Also, make sure they are completely dry! After placing the toys on the rack, add some soap or a cleaning agent of your choice.
Usually, the best course of action is to use the warm cycle setting to make sure the toys come out dry. Some contemporary dishwashers feature a bonus cycle for sterilization (much higher temperatures) which is not the cycle you would want to use for numerous reasons. Therefore, make sure to turn the sterilization cycle OFF before your push start.
Once the washing cycle is finished, put the toys on a clean and dry towel for 20-30 minutes.
Due to the adverse properties of bleach, this method should only be used occasionally and with great attention. Therefore, you should always pay special attention to the amount of bleach you’re using as well as the ratio of water and bleach in the solution.
Combine one tablespoon of chlorine bleach with one gallon (3.8 liters) of water. You can add more water to the solution if you feel like it’s too concentrated. Adding more water will dilute the solution and lower its harmful effects.
Soak the toys in this solution for about 3-4 minutes, and make sure to press the toys while soaking so that the inside gets filled too. Make sure to rinse the toys thoroughly after this process, and leave them to dry off for at least 30 minutes to an hour.
As you can tell, figuring out how to disinfect bath toys isn’t a tough challenge once you get the general idea of how important it is to keep them sanitary and clean. Keeping your kids away from health hazards should be your number-one priority, and the aforementioned methods are a pretty good tool for battling against numerous diseases.
As long as you’re using a proper ratio of water and cleaning agents, you shouldn’t stumble upon any major obstacles.